How to Broadhead Tune Your Compound Bow

How to Broadhead Tune Your Compound Bow in 2023

Searching for How to Broadhead Tune Your Compound Bow? Well, you’re not alone here, there are many who ask the same question so here we are with our own detailed guide on this question.

As time ticks by, and if you haven’t yet found your goal to knock down with a single arrow, you might be starting to feel like you’re going to have a tough time hitting your deer target.

However, if you want to be the best bow hunter and take down the most significant game you can, your best bet is to tune your equipment objectively so that it’s never off target especially if you use compound bows.

Because, the compound bow is a complex and expensive piece of equipment, so it’s important to tune your archery gear to make it as efficient as possible.

Many bowhunters have their own ideas about how to tune your bow before hunting season begins. However, the most important thing for anyone who wants to succeed in this sport is to know that the essential part of tuning a bow is looking at things through the victim’s eye.

I can assure you there is nothing quite like an arrow taking flight from a string and punching into the head or neck of your intended victim. In this article, we’ll give you tips for the perfect broadhead tune.

How to Broadhead Tune Your Compound Bow

How to Broadhead Tune Your Compound Bow:

Learning how to tune a compound bow is not difficult at all and the end results are worth the effort. Here’s an overview of how you can tune your compound bow:

Always Check the Strings:

No matter how much money you’ve invested in your compound bow, even the best one will require restringing. You can try putting it off, but over time it’ll hurt your accuracy and do irreparable damage to your string.

For example, You’re a professional archer, and you’re constantly on tour because of your chosen profession. Because of that, your bowstrings are under constant tension. And when your bow sits unused for months at a time, the strings begin to stretch across the bridge.

This type of cam rotation can be used to ensure that you’re hitting the correct position on your bow and being able to fix any flaws that may be occurring with your limbs.

This cannot only affect your shot. A string break is difficult to notice and usually happens when you hit a feather or some other object that gets stuck in the key groove.

Make sure your bow is in good condition. The string may not need to be replaced yet, but give it a check and see if you can pull the ends back. Leave them there under some tension. Check if your limbs are loose, and re-tension them if they are. This will make shooting much easier for you!

Remember to change your bowstring at least every other year. Look back through the photos you’ve taken during that period to determine how long ago it was replaced. If you just moved into a new house or apartment, then looking back through the last three years of photos will be more than enough to know if the bowstring should be replaced soon.

Consider Your Draw Length?

It’s essential as an archer to remember that not every arrow is right for you and your equipment. While some may be at the perfect length, other ones can damage your shooting form and get in the way of you shooting correctly. It’s vital to find the best balance between what’s effective and what makes sense, practically speaking. 

When purchasing your next set of arrows, please make sure there is enough information on the label indicating the proper draw length that they are meant to be used with.

The most effective method for determining your draw length is to take a measurement from the end of your fist to the tip of your longest finger using a flexible tape measure. Divide that measurement by 2.5 and that number figuratively marks the spot.

If you’re having trouble locating or adjusting your draw weight, you can visit a local archery shop for help.

Do Find the Center Shot:

The bow, arrow, and shooter must be aligned for effective and consistent aim when taking a shot. When the arrow rests on the bow string’s centerline, it’s known as the “Center Shot”.

If it has been some time since you’ve last shot a bow, chances are that your center shot is off. If you do not take the necessary steps to adjust this like using a broadhead tuning device to ensure that your aim is on target as best as possible, then you run the risk of missing your mark more than if you had taken care of this important issue sooner rather than later.

Some archers prefer to use a laser guide or bow square. But either way, find the center shot (marked on all nocks) before installing your new nock.

Do Peep Alignment:

When your arrow’s center shot is aligned with the broadhead, it’s time for us to check how far out your target is.

While an archer does not necessarily need a peep, it can definitely make the process of aiming easier by providing a straightforward guide to the eye. If you wonder what the heck this means, here is how it works:

There are two parts to every bow sight; a pin and a ring. The pin fits into the center of the ring, but they can actually move along three different axes of movement because they aren’t attached together. To keep these ladies moving in sync, you will usually find some sort of “peep-hole” in either one or both of them.

Close your eyes and raise the arrow to a natural position to ensure accuracy. When you open your eyes, the tip of the arrow should be lined up with the sights on your bow.

If you are looking at the center of the wall, arrange your peep to align with it.

Choose the Right Arrow:

Choosing the right bow isn’t simply about what type of bow you use. You also have to find arrows that work best for your needs.

Spine

Plenty of bowhunters has spent hours trying to tune the broadheads on their arrows only to choose an arrow weight or stiffness that was less than ideal, which can certainly be frustrating.

Bow speeds vary and thus do the needs of custom-fitted arrows. Archery enthusiasts understand that a flexible arrow is needed for archers shooting with a high bow speed, whereas less flexibility is appropriate for those shooting with a low-speed bow.

If a bow has too much flex, it will not shoot an arrow straight. Choosing the wrong arrow will lower your chances of hitting your targets with it.

Fletching

The spine and the fletching of an arrow may prove to be equally important in terms of choosing a successful arrow, but what’s even more important is how both elements stand up to repeated firings. As such, it is imperative to choose quality and resilient materials for your arrows that will help them stand up to repeated firings without falling apart entirely—such as using quality wooden shafts with durable bindings.

Front of Center

Though the fletching does a lot in terms of stabilizing the arrow, it cannot hold it up all on its own.

Also, an arrow should be made up and weighted properly. To achieve the same stability, an arrow needs a reasonable amount of weight at its front. This factor is called the FOC or Front of Center.

The best way to find an arrow’s center of gravity is to flick a long-range projectile back and forth between two fingers until it comes to a stop at the ideal equilibrium point. One then measures from this balancing point down to the nock groove.

To calculate the center of balance for an arrow, take the average of the two points where the arrow’s weight is equally distributed and divide that by two or subtract it from the center. From there you can determine which adding quarter cores would lead to your best aim.

To choose a good arrow, you want the FOC to range between 7% and 10%.

Test Your Arrows:

Once you have the right arrows, take a moment to test them. Weight each on a scale to ensure there isn’t too much variance.

Rotate the arrowheads backward so they point towards the shafts. Ensure that the arrowheads are appropriately placed and locked in their rest. This will ensure that your bow’s flight is good and it will also keep you safe while shooting.

A broadhead tune really doesn’t matter without the proper arrows. It is important to test your arrows before you begin any hunting trip with them because if they are off in any way, there’s no guarantee that you will be shooting straight as a result.

Try It Out:

Once you’ve sharpened your crossbow’s broadhead for hunting season, it’s essential to test the bow in a safe environment.

Do Paper Test:

Set up a sheet of paper with a target drawn on it. Attach the paper to something that will allow you to draw an arrow towards it. Be mindful of backstops and other similar materials that prevent further injury should the arrow hit them unexpectedly. 

Practice your archery skills. Always follow the proper form; if not, you might never hit your target!

Look at the gaps in the paper. The way your blade will tear through will help you improve your aim. Identify and resolve issues from the paper test by adjusting your bow.

Do field test:

After testing your bow to make sure that it is ready to be released onto the market, take note of any problems that you discovered during testing and adjust accordingly.

Fire two shots at the target. Take a five-minute break. Then, fire two more shots at the target.

Then fire must be just as accurate at thirty, forty, and fifty feet distances from what you’re aiming at. If the consistency of your shots can be counted on with little error, that means you executed the adjustment correctly. If you are still having trouble keeping your shots consistent after running through the steps from beginning to end, go back and look for where you may have gone wrong and fix it. 

Start Shooting:

After your bow is tuned, you’ll want to start using it!

Deer hunting and archery are two of the most satisfying recreational sports for a hunter.

If you’re finding that even a proper broadhead tune won’t get your bow working properly anymore, it might be time to pick up a new one.

Conclusion:

When it comes to compound bow tuning, there are a few simple steps that you can take to improve your deadly accuracy. With these tips, you’ll be able to increase your accuracy and kill more games.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *